Access Point Price in Nepal 2026: Indoor, Outdoor and PoE WiFi Access Points

Looking for the latest access point price in Nepal? Computer Planet offers dedicated indoor and outdoor wireless access points for homes, offices, schools, hotels, restaurants, shops, warehouses, farms and other locations that need reliable WiFi beyond the range of one router. Compare Cudy WiFi 5 and WiFi 6 access points with Gigabit Ethernet, Power over Ethernet (PoE), multi-device support and centralized management options.

A wireless access point, or AP, connects to a router or network switch and creates WiFi in a new area. Unlike a basic wireless repeater, a wired AP normally uses Ethernet for its connection back to the network. This can provide a more stable foundation for multi-room, multi-floor and business WiFi, although actual performance still depends on the internet plan, cabling, AP placement, interference and client devices.

Access Point Price in Nepal 2026

The current price of a dedicated wireless access point at Computer Planet ranges from approximately NPR 9,225 to NPR 17,550. Indoor AC1200 access points begin at around NPR 9,225, while weather-resistant outdoor WiFi 5 and WiFi 6 models cost more because they add rugged enclosures, outdoor mounting hardware, surge protection and higher-capacity wireless technology.

Latest Wireless Access Point Price List in Nepal

*Prices were checked against the live Computer Planet catalogue in September 2026. Prices, discounts, stock, hardware revisions and package contents can change. Check the product page for the current selling price, warranty and whether a PoE injector or power adapter is included before ordering.

What Determines Access Point Cost in Nepal?

The access point cost in Nepal depends on its WiFi generation, wireless class, Ethernet-port speed, indoor or outdoor construction, PoE standard, antenna system, supported client capacity and management features. A WiFi 6 outdoor access point generally costs more than an indoor WiFi 5 model because it is designed for more demanding environments and larger numbers of active devices.

Do not choose only by the largest Mbps number. AC1200 and AX3000 are combined theoretical wireless classes across multiple bands; they are not guaranteed internet speeds for one phone or laptop. A well-positioned AC1200 AP may be the better value for moderate use, while AX3000 can be more suitable for newer devices and busier networks.

Which Access Point Should You Buy in Nepal?

The right access point is determined by the site, not only by the advertised coverage figure. Thick reinforced-concrete walls, brick partitions, metal shelving, tinted glass, floor slabs and nearby WiFi networks can all change the result. For important business deployments, plan AP locations from a floor layout and verify them with a site survey or real signal tests.

What Is a Wireless Access Point?

A wireless access point is a networking device that turns a wired Ethernet connection into a WiFi coverage zone. It usually sits behind the main router: the router connects the local network to the internet and handles functions such as routing, DHCP and firewall policies, while the AP concentrates on wireless connectivity.

How an Access Point Works

The usual topology is ISP fibre terminal or modem, main router, Ethernet switch and then one or more access points. The AP receives network data through Ethernet and exchanges it wirelessly with phones, laptops, tablets, smart TVs, printers and other compatible devices.

When PoE is used, the same Ethernet cable can carry both network data and electrical power. This makes ceiling, wall and pole installation much easier because a power socket is not required beside every AP. The PoE switch or injector must still match the access point's supported standard and voltage.

What an Access Point Does Not Do

A dedicated AP does not automatically replace every function of the main router. In a normal deployment, the router remains responsible for the internet connection, NAT, DHCP and firewall. Some multi-mode devices can also operate as routers, repeaters or WISP clients, but the selected operating mode changes how the network behaves.

An AP also cannot create more bandwidth than the ISP provides. It can improve local coverage and distribute wireless access more effectively, but internet speed remains limited by the subscribed plan, uplink, congestion, server and client hardware.

Types of WiFi Access Points Available in Nepal

Indoor Ceiling or Wall-Mount Access Points

Indoor APs are designed for offices, schools, hotels, clinics, restaurants and homes with structured Ethernet cabling. A ceiling position often provides a clearer path to users than a router hidden in a cabinet or placed at one end of the building. The Cudy AP1300 Indoor supports wall or ceiling mounting, dual-band AC1200 WiFi and a Gigabit Ethernet uplink.

An indoor access point is not intended for direct rain, outdoor humidity or exposed dust unless the manufacturer explicitly gives it a suitable ingress-protection rating. Use a purpose-built outdoor model for rooftops, poles, gardens and exterior walls.

Outdoor Weatherproof Access Points

Outdoor wireless access points use sealed housings and mounting systems for exposed areas. The Cudy AP1300 Outdoor and AP3000 Outdoor are rated IP65, meaning their enclosures are designed for dust protection and resistance to water jets under the conditions defined by that rating. IP65 does not mean the unit should be submerged, and connectors still need correct installation and weather protection.

Outdoor APs can serve courtyards, terraces, parking areas, farms, school grounds, resorts and warehouse yards. Their published range is normally measured in favourable open conditions. Buildings, trees, vehicles, elevation, antenna orientation and local interference can reduce practical range.

WiFi 5 Access Points

WiFi 5, also known as 802.11ac, remains a cost-effective choice for general business and home use. The Cudy AP1300 indoor and outdoor models combine up to 867 Mbps on 5GHz and 300 Mbps on 2.4GHz under manufacturer specifications. They provide Gigabit Ethernet so the wired uplink is not limited to Fast Ethernet speeds.

WiFi 5 can handle browsing, cloud applications, video calls, HD streaming and ordinary guest WiFi when the network is planned correctly. The number of demanding simultaneous users matters more than the total number of devices merely connected or idle.

WiFi 6 Access Points

WiFi 6, or 802.11ax, adds technologies designed to use airtime more efficiently with compatible clients. The Cudy AP3000 Outdoor provides a dual-band AX3000 wireless class of up to 2402 Mbps on 5GHz and 574 Mbps on 2.4GHz. OFDMA and MU-MIMO can improve efficiency when many compatible devices are active.

Choose a WiFi 6 access point for busier networks, modern phones and laptops, higher concurrent traffic or longer replacement cycles. Older WiFi devices can still connect through supported legacy modes but will not gain every WiFi 6 benefit.

Standalone and Controller-Managed Access Points

A standalone AP can be configured individually and may be sufficient for a small installation. Controller-managed access points can be adopted into one interface for tasks such as SSID configuration, monitoring, firmware updates and management of multiple units.

Centralized management becomes more valuable as a network grows across several rooms, floors or buildings. Confirm controller compatibility, firmware requirements and available features for each AP revision before purchasing. Some functions—including advanced roaming, captive portal or cloud management—may require compatible Cudy gateways, controllers or firmware.

Compare Cudy Access Points in Nepal

Cudy AP1300 Indoor: AC1200 Business WiFi Access Point

The Cudy AP1300 Indoor is a dual-band WiFi 5 access point designed for offices and classrooms. It supports theoretical wireless rates of up to 867 Mbps on 5GHz and 300 Mbps on 2.4GHz, one shielded Gigabit Ethernet PoE input and wall or ceiling mounting. Manufacturer specifications rate it for up to 100 connected devices and approximately 100 square metres under test conditions.

It supports 802.3af/at PoE, compatible passive PoE and DC power options, depending on the exact hardware and package. MU-MIMO helps serve compatible devices more efficiently, while beamforming can improve signal delivery in suitable conditions. It is a practical choice for an indoor office, training room, café, reception area or classroom where an Ethernet cable can reach the planned AP location.

Cudy AP1300 Outdoor: AC1200 Waterproof Access Point

The Cudy AP1300 Outdoor combines dual-band AC1200 WiFi with an IP65 enclosure, a shielded Gigabit Ethernet PoE input and pole or wall mounting. Cudy lists up to 100 connected devices, a maximum open-space range of 170 metres and operation from -40°C to 65°C under manufacturer test specifications. Real coverage and capacity will vary by installation and workload.

This model is suitable for an outdoor café, garden, parking space, school ground, farm, resort or open compound that needs dependable general-purpose WiFi. It supports 802.3af/at and compatible passive PoE. Confirm the exact included adapter, grounding and cable requirements before installation, especially in an exposed location.

Cudy AP3000 Outdoor: AX3000 WiFi 6 Access Point

The Cudy AP3000 Outdoor is the higher-capacity option in the current Computer Planet range. It offers four-stream dual-band WiFi 6 with manufacturer link rates of up to 2402 Mbps on 5GHz and 574 Mbps on 2.4GHz. The model adds an IP65 enclosure, external high-power front-end modules, 802.3at or compatible passive PoE, OFDMA, MU-MIMO and centralized management support.

Cudy rates the AP3000 Outdoor for up to 200 connected devices and a maximum open-space range of 320 metres under test conditions. These figures are useful for comparison, not promises for every property. Active video streams, calls, cloud backups and CCTV traffic consume much more airtime than idle devices, and obstacles can substantially shorten range.

How to Choose the Best Wireless Access Point

Start With the Area and Building Layout

Mark the rooms, floors and outdoor zones that need WiFi. Note concrete walls, stairwells, lift shafts, metal racks and other barriers. A single high-power AP cannot always penetrate several reinforced walls; two properly placed APs may perform better than one unit running at maximum transmit power.

For multi-floor Nepalese homes and commercial buildings, Ethernet cabling between floors can create a more stable backbone than trying to push one wireless signal through concrete slabs. Place APs near users and open circulation areas rather than inside cabinets or behind large metal objects.

Estimate Concurrent Users and Real Workloads

Count the devices likely to be active at the same time, not only the total registered devices. Ten people in video meetings can create more sustained traffic than dozens of idle phones. Hotels, schools and cafés should also consider busy-hour guest traffic, authentication, bandwidth limits and staff networks.

Published client ratings are normally obtained under controlled conditions. They do not mean every listed device can simultaneously receive its maximum speed. If the site is business-critical, divide users across multiple APs and size the internet connection, switch and router accordingly.

Match the AP to Your Internet and LAN Speed

If your ISP plan or local server traffic exceeds 100 Mbps, use Gigabit Ethernet or faster throughout the relevant path. A 100 Mbps switch port or old cable can bottleneck a modern access point. Cat5e or better cabling is commonly used for Gigabit Ethernet when correctly terminated and within supported distance.

Wireless link rates are higher than real application throughput because WiFi carries protocol overhead and shares airtime. Distance, interference, channel width and the phone or laptop's own radio also affect speed.

Choose the Correct PoE Method

Check whether the AP uses standards-based 802.3af, 802.3at or passive PoE. Standards-based PoE negotiates power between compatible equipment; passive PoE supplies a fixed voltage and must match the device requirement. Never assume that every PoE injector or switch is interchangeable.

Also check the total power budget of a PoE switch. A switch may have enough ports but insufficient wattage to power every connected AP and camera at full demand. For outdoor cabling, use suitable cable, weatherproof glands, grounding and surge-protection practices recommended by the manufacturer and installer.

Review SSIDs, VLANs and Guest WiFi

Businesses may need separate wireless networks for staff, guests, IoT devices and CCTV. Multiple SSIDs provide different WiFi names; VLAN support can carry those networks separately through compatible managed switches, routers and firewalls. An AP alone does not create full network isolation unless the upstream equipment and configuration support it.

Guest portals, client isolation, bandwidth limits and enterprise authentication can improve control, but availability may depend on the controller and firmware. Define these requirements before choosing hardware.

Plan Management and Future Expansion

One independently managed AP may be fine for a small office. A hotel, school or campus benefits more from compatible units that can be monitored and configured together. Staying within one supported AP ecosystem can simplify adoption, roaming features and firmware maintenance.

Allow spare switch ports, PoE budget and Ethernet routes for future expansion. Replacing one overloaded network with several sensibly placed APs is often more effective than continually raising transmit power.

Access Point vs Router vs Mesh WiFi vs Extender

Is an Access Point Better Than a WiFi Extender?

An access point is generally more predictable when Ethernet cabling is available because the AP does not need to use its client-facing WiFi connection as the only path back to the router. However, it is inaccurate to promise “zero bandwidth loss”: real throughput is still affected by Ethernet speed, WiFi overhead, interference, channel use and client capability.

A WiFi extender is easier where cabling is impossible and only a small weak area needs coverage. Install the extender where it still receives a usable source signal, not inside a complete dead zone.

Should You Choose Access Points or Mesh WiFi?

Choose wired access points when you can install Ethernet, need predictable capacity, want PoE ceiling mounting or require business features. Consider a mesh WiFi system when wireless backhaul and simple home management are priorities. Some Cudy access points also support mesh-related functions, but compatibility and gateway requirements should be confirmed for the exact models and firmware.

Can a Wireless Router Work as an Access Point?

Selected wireless routers include AP mode. In this mode, the router uses a wired connection to the primary router and creates another WiFi zone. This can be economical for a room or small shop, although a dedicated AP usually offers more suitable mounting, PoE and centralized-management options.

Access Points for Homes and Businesses in Nepal

Offices and Corporate Workspaces

Business access points can distribute coverage across meeting rooms, work areas and receptions without relying on a consumer router at one corner. Multiple SSIDs can separate staff and visitors, while controller-based management can simplify consistent configuration. Plan enough AP capacity for video calls, cloud applications and busy-hour usage.

Hotels, Resorts and Guest Houses

Hotels often need several indoor APs for rooms and corridors plus outdoor coverage for gardens, restaurants or parking. WiFi does not pass evenly through every room, so one AP per floor is not a universal rule. Wall materials, room arrangement and desired capacity should guide placement.

For guest WiFi, consider a captive portal, client isolation, bandwidth policies and VLAN segmentation with compatible networking hardware. Access points are one part of the solution; the router, switches, internet connection and management platform also matter.

Schools, Colleges and Training Centres

Classrooms can generate high concurrent demand when many students connect at once. A WiFi 6 AP can improve airtime efficiency with compatible devices, but good channel planning and multiple APs may be necessary. Separate administrative, teacher, student and guest traffic where the network design permits.

Cafés, Restaurants and Retail Stores

A ceiling AP can cover an indoor customer area, while an IP65 outdoor model can extend service to a terrace or entrance. Keep point-of-sale terminals and business systems separate from public guest WiFi using suitable VLAN and firewall policies. Do not expose internal devices simply because the AP offers multiple SSIDs.

Warehouses, Workshops and CCTV Areas

Metal shelving, machinery and moving stock can create reflections and coverage shadows. A site survey is particularly useful in warehouses. WiFi may support handheld terminals and mobile devices, but fixed IP cameras and recorders are often more reliable over wired Ethernet or PoE where practical.

Farms, Gardens and Open Compounds

Outdoor access points can serve open properties when they have a clear path to users. Mounting height, antenna orientation, trees and terrain affect performance. Use outdoor-rated cabling and correct surge, grounding and weatherproofing practices; an IP65 AP does not protect an incorrectly exposed indoor injector or connector.

Installing a PoE Access Point

Basic Network Topology

A common installation follows this order: ISP optical network terminal or modem, main router, PoE switch or injector, and then the access point. The main router normally continues to assign IP addresses and manage the internet connection. A managed switch may carry separate VLANs to the AP where required.

Placement Guidelines

• Mount an indoor AP in an open, central position near the users it should serve.

• Avoid closed cupboards, corners behind concrete columns and positions beside large metal objects.

• Keep multiple APs far enough apart to limit unnecessary overlap but close enough to avoid coverage gaps.

• Select non-conflicting channels based on an actual scan rather than leaving every AP on the same channel.

• Use 2.4GHz for range and compatibility where needed, and 5GHz for higher capacity at shorter practical distances.

• Mount outdoor APs according to the manufacturer's orientation, drainage and weatherproofing instructions.

Ethernet and Power Checks

Test and label every cable before final mounting. Confirm the switch port negotiates the intended link speed and that the PoE standard, voltage and power budget match the AP. Keep any non-weatherproof injector indoors. Long cable runs must remain within Ethernet and PoE limits and should be installed by a qualified technician where safety or lightning exposure is a concern.

Configuration and Security

Change default administrator credentials, install current stable firmware and use a strong WiFi password. Prefer WPA2 or WPA3 as supported by the AP and required clients. Create a separate guest network, disable unnecessary remote administration, back up the configuration and document AP names, locations, switch ports and IP addresses.

Connecting an Access Point to WorldLink, Vianet, Subisu or DishHome

In many installations, a third-party access point connects by Ethernet to a LAN port on the ISP-provided router or to a switch behind it. The ISP unit can remain the router and DHCP server while the AP provides improved wireless coverage. This avoids changing the fibre termination or ISP authentication configuration.

Before installation, confirm:

• A working Gigabit LAN port is available on the ISP router or upstream switch.

• The Ethernet cable reaches the intended AP location.

• The access point receives compatible PoE or DC power.

• The ISP router's DHCP service remains active when the AP is in bridge/AP mode.

• Any VLAN, IPTV, voice or business-network requirements are understood.

• Two DHCP servers or unintended router mode will not create a second subnet or double NAT.

Compatibility and account settings can vary by ISP equipment and service. Ask your ISP or a networking technician before changing bridge mode, PPPoE, VLAN or optical-terminal settings.

Why Buy a Wireless Access Point from Computer Planet?

Computer Planet supplies networking products for home users, businesses, IT resellers and system integrators in Nepal. Customers can compare current access point prices online, review product features and order for delivery across Nepal. Product-selection guidance is also available through Computer Planet stores in Kathmandu and Biratnagar.

• Current prices displayed in Nepalese rupees

• Genuine Cudy access points and applicable warranty support

• Indoor and outdoor choices for different sites and budgets

• Retail and wholesale networking supply

• Secure online ordering and supported digital-payment options

• Cash on Delivery where the service is available

• Nationwide delivery across Nepal

• Guidance on AP selection, PoE, switches and network expansion

• After-sales support from an established Nepalese computer and networking retailer

Explore more networking products in Nepal, compare network switches and PoE switches, or contact Computer Planet for help selecting equipment for your floor plan and user capacity.

Frequently Asked Questions About Access Points in Nepal

What is the price of a wireless access point in Nepal?

The current dedicated wireless access point price in Nepal at Computer Planet starts at approximately NPR 9,225 for the Cudy AP1300 Indoor and reaches NPR 17,550 for the Cudy AP3000 Outdoor WiFi 6 model. Prices and stock can change, so check the live product listing before ordering.

Which is the best access point for an office in Nepal?

The Cudy AP1300 Indoor is a practical value option for an office, classroom, café or training area that needs dual-band WiFi, Gigabit Ethernet and PoE. For a busier WiFi 6 deployment or large property, requirements should be assessed by active users, layout, switch capacity and management needs rather than by one model name alone.

Which access point is best for outdoor use?

Choose an IP-rated outdoor model. The Cudy AP1300 Outdoor suits general AC1200 outdoor coverage, while the Cudy AP3000 Outdoor adds WiFi 6 and higher manufacturer-rated capacity. Neither model can guarantee a fixed range because obstacles, interference, mounting and clients affect real coverage.

What does PoE mean on an access point?

PoE means Power over Ethernet. It allows a compatible Ethernet cable and power source to carry both data and electricity to an access point. Verify the AP's required PoE standard or passive voltage and the switch's available power budget before connecting it.

Does a PoE access point need a power adapter?

Not beside the AP when it is correctly powered by a compatible PoE switch or injector. A PoE injector itself usually needs mains power at the source end. Package contents vary, so confirm whether an injector or DC adapter is included with the exact model.

Can I connect an access point to my existing WiFi router?

Yes. Connect the AP by Ethernet to a LAN port on the router or a switch behind it, configure AP/bridge mode and create the required WiFi name and security settings. The main router can continue handling DHCP, NAT and the ISP connection.

Will an access point increase my internet speed?

An AP can improve WiFi coverage and local connection quality, but it cannot increase the speed purchased from the ISP. Internet performance remains limited by the ISP plan and can also be constrained by the router, switch, cable, AP, interference or client device.

How many devices can one access point support?

It depends on the model and workload. Cudy rates the AP1300 models for up to 100 connected devices and the AP3000 Outdoor for up to 200 under manufacturer test conditions. The number of devices that can stream, call or transfer data simultaneously at a satisfactory speed will be lower and depends on available airtime and bandwidth.

How many access points do I need for my building?

There is no reliable one-AP-per-floor rule. The answer depends on walls, floor area, user density, channel plan, mounting positions and expected applications. Start with a floor plan and use a site survey or practical signal tests for an important home or business network.

Can all access points use the same WiFi name?

Yes, multiple APs can broadcast the same SSID and security settings. This makes one network easier to use, but the client device still participates in roaming decisions. Fast-roaming and steering features may require compatible APs, controllers, gateways, firmware and client support.

Is an outdoor access point fully waterproof?

Use the manufacturer's IP rating rather than assuming “fully waterproof.” An IP65 enclosure is designed to resist dust and water jets under specified test conditions, not submersion. Correct orientation, cable glands, drip loops, grounding and protection of connectors and injectors remain essential.

Do I need a controller for multiple access points?

Not always. A small number of APs can often be configured individually, but a compatible controller makes centralized configuration, monitoring and firmware management easier. Confirm which features require the controller and whether the selected AP hardware and firmware support them.

Is WiFi 6 better than WiFi 5 for an access point?

WiFi 6 can improve efficiency and capacity with compatible devices, making it useful for busy or future-focused networks. WiFi 5 remains cost-effective for moderate workloads. Proper AP placement, wired uplink, channel planning and sufficient internet bandwidth often matter more than upgrading the WiFi label alone.

Where can I buy a genuine access point in Nepal?

You can buy indoor and outdoor Cudy access points from Computer Planet online at cplanetnp.com, with delivery available across Nepal. Customers can also visit Computer Planet in Kathmandu or Biratnagar for product guidance, current price and applicable warranty information.

Buy Access Points Online in Nepal

Compare the latest access point price in Nepal and choose an indoor, outdoor, WiFi 5 or WiFi 6 model based on your building, active users, PoE requirements and network-management plan. Computer Planet offers genuine networking products at competitive prices for homes, offices, schools, hotels, restaurants, farms and system-integration projects, with retail and wholesale support and delivery across Nepal.

For the most accurate recommendation, share your floor plan, indoor or outdoor coverage area, internet speed, approximate concurrent users, available Ethernet cabling and PoE-switch details with the Computer Planet team before ordering.